Small incinerator
Garbage incinerator/Small incinerator
Small incinerators are designed to be able to incinerate bulky and heavy wastes at once by bulk input method and to completely pyrolyze various wastes efficiently.
In particular, high-temperature refractory castables are used for complete combustion, shortening the incineration time and dramatically extending the life of the facility.The combustion system with controlled air is pyrolyzed in the primary combustion chamber. It is a supplying system, and the primary combustion promotes pyrolysis to high temperature, and many gases generated from the primary combustion chamber pyrolysis enter into the secondary combustion chamber as a combustible mixed gas, and the ignition of the secondary burner part and the direct injection of secondary air Is reburned.
The combustion ratio of the secondary combustion burner is adjusted to maximize the secondary combustion chamber temperature and at the same time minimize the fuel consumption of the secondary combustion burner.
The dust particles generated after combustion are collected in the dust box by the centrifugal force of the cyclone, and the inside of the cyclone is castable, so it is completely burned 3rd by the high temperature pyrolysis effect, and only the safe clean gas is discharged through the stack to the atmosphere.
The main goal of air conditioning systems is to minimize dust particle emissions and soot emissions, and to meet stringent emission limits, particularly with regard to dust and soot concentrations.
● ApplicationHousehold waste, industrial waste, hospital waste, etc.
● Capacity100kg / hr -300kg / hr
● Equipment compositionPrimary gasification chamber → Secondary combustion
chamber → Air pollution prevention facility (cyclone)
● Equipment composition-Bulk input method, Smokeless odorless complete
combustion, Refractory inside centrifugal dust collectorReburn unburned gas
with construction, cheap maintenance, easy operation and maintenance
General waste standard
Blast furnace incinerator / 2 Batch incinerator
Batch-type waste incineration treatment equipment is a convenient way to carry out the operation of waste by injecting various kinds of wastes generated in domestic waste and industrial sites at once, and the waste of incineration residues can be automatically recovered.
Not only household waste, but also synthetic resins, waste rubber, waste fiber, waste leather, waste wood, waste paper, medical waste and other industrial (living) wastes have excellent performance in dry-burning incineration.
Almost no need for sorting and crushing before input, and less work for the manager, and operation is performed in a completely enclosed state without any load changes, so there is no fear of complaints due to incomplete combustion and odor.
The primary combustion chamber and the secondary combustion chamber are separated from each other, so that accurate air control and temperature control are easy for the combustion and the waste reduction efficiency is low and maintenance cost is low.
● ApplicationHousehold waste, industrial waste, hospital waste, etc.
● Capacity1 ton / 10 hours-10 tons / 10 hours
● FacilityInput device → Type 2 gasification chamber → Secondary combustion chamber → Air pollution prevention facility (cyclone)-Automatic discharge is possible by inputting the amount of waste generation onceBatch Type.
-Combustion air injection is supplied quantitatively at the proper position to stabilizeBurn incineration.
-It is possible to reduce the labor cost since there is no need for management personnel during off hours.
-Stable incineration, no furnace impact, long life.
-Flexible drying can lead to flexible waste.
-Suitable for large bulky waste disposal facility.